Free quotesReply within one business dayServing OR · WA · CA, shipping nationwide
Mon–Fri 8am–5pm PTTalk to our team: 971-337-6608
Lenokers/Services/Racking Services/Rack Anchoring
Pallet rack anchoring across Oregon, Washington, California and beyond: missing and failed anchors replaced, sized to your rack, slab and seismic zone.
Reply within one business day
Anchoring quotes are free
Portland-based, serving OR, WA, CA and beyond
We reply within one business day.
years installing racking
racking installations completed
our core service area, with projects beyond it
Photos from our own jobs
Anchoring quote
Free
First reply
Within 1 business day
Anchors per base plate
Sized to your rack
“They did a great job, reasonable pricing, and they are very open to jobs with shifting deadlines/priorities.”
Rocky Pope, Google review
Free quote · reply within one business day
Missing, loose or sheared anchors found, bay by bay.
Diameter and embedment from the rack maker’s spec and your slab.
Holes cleaned, anchors torqued, plates shimmed level.
Frames plumb and every anchor tight before the bay is used.
Your part: the address, roughly how many frames, and a photo of a base plate.
We price the anchors and labour and book the crew.
We drill, set and torque anchors around your forklifts.
You see every frame plumb and anchored before we leave.
Your total effort: one call, one walk-through.
The US rack standard expects base plates anchored to the floor.
Oregon, Washington and California racks are anchored for earthquakes.
Anchor size, embedment and count per base plate, as specified.
Anchorage shown on the drawings and inspected when the city asks.
Older or moved racking often stands on its plates alone. We anchor it where it stands.
Every frame that moves needs new anchors in its new spot, after a reconfiguration or a warehouse relocation.
Missing anchors on a pallet rack inspection report? We fix the list.
Explore services
4 services
Find the bottlenecks, then plan what comes next.
Coming soon
Forklift, parts and equipment services are on their way. Need one now? We’ll still quote it.
Dmytro and Lenokers went above and beyond my expectations. We were looking to liquidate a good amount of pallet racking from our warehouse and between our first contact and our warehouse being cleared of our racking, barely a week had passed! They were kind, courteous, and more than professional for the entire experience. I would not hesitate working with them again!
Lenokers did a great job for us. Professional and timely. I recommend there services.
Dmytro was great to work with
All went smoothly
Will definitely be calling again
Tim
Steel Tek
We had to move some inventory around very quickly to make room for a new customer and we ran out of rack space. I called Lenokers and they had exactly what we needed. Within 3 hours we had our racking and we're back to getting organized!
Thanks guys!
It was a pleasure working with Dmytro and his team to improve our warehouse! Timely communications and service.
Do pallet racks need to be anchored?
Yes. The US rack standard, ANSI MH16.1 (RMI), expects every base plate to be anchored to the floor, and in Oregon, Washington and California anchoring is part of designing racks for earthquakes. Unanchored racks can tip, walk out of line when hit, or fall in a quake.
What does OSHA require for rack anchoring?
OSHA has no rule written only for anchoring, but it requires storage to be stable and secure (29 CFR 1910.176(b)), and inspectors point to the rack standard and the maker’s instructions. Anchored racking with load signs posted is the clear way to show it.
What size anchor bolts do pallet racks need?
It depends on the rack maker’s spec, the load and the slab. A common setup is a ½" wedge anchor with at least 3¼" embedment, one or two per base plate, on a slab of 6" or more; seismic designs can call for more. We size them to your rack, not to what’s on the shelf.
How much does anchoring cost?
It depends on how many base plates need anchors, how many anchors each takes, and the slab. Send roughly how many frames you have and a photo of a base plate, and we’ll send a free quote.
Can you anchor racks that are already loaded?
Usually, yes. Most base plates can be drilled and anchored with the bay loaded; we work aisle by aisle around your forklifts. Where a plate has to be lifted or shimmed, that bay is unloaded first.
Can we anchor racks ourselves?
It looks simple, but it’s easy to get wrong: wrong anchor size, holes too shallow, dust left in the hole, plates not shimmed, or drilling into rebar or a thin slab. The silica dust from drilling concrete is regulated by OSHA too. A trained crew does it to spec, faster.
What if a forklift sheared an anchor?
Keep the bay empty until it’s checked. If the frame is straight, we replace the anchors; if the upright or plate is damaged, it’s a pallet rack repair first, then anchors.
Do anchors need a permit?
Not on their own, usually. But racking that needs a permit, such as tall or high-piled storage, shows its anchorage on the drawings, and the city may inspect it. See high pile storage permit.
Send the address and a photo of a base plate. We take it from there.
Anchoring quote at no cost
Anchors sized to your rack and slab
Done aisle by aisle, around your forklifts
Prefer to talk? Call 971-337-6608 · Mon–Fri 8am–5pm
We reply within one business day.
Lenokers provides pallet rack anchoring as part of our pallet racking services, for warehouses across Oregon, Washington, California and beyond, from our base in Portland. New racking is anchored as part of every pallet rack installation; this service is for racking that’s already standing, with anchors missing, loose or sheared.
Anchors keep a rack from tipping when a pallet is set down hard, from sliding out of line when a forklift bumps a frame, and from overturning in an earthquake. A rack that is plumb and anchored carries its load the way it was designed to.
Most racking uses wedge anchors set into concrete, often ½" in diameter with at least 3¼" embedment, one or two per base plate. The exact anchor comes from the rack maker’s spec, the loads and the slab. The concrete must be sound and thick enough, usually 6" or more; asphalt or thin toppings won’t hold.
ANSI MH16.1, the RMI standard for steel storage racks, expects base plates anchored to the floor. OSHA asks for stable, secure storage (29 CFR 1910.176(b)) and looks to that standard. On the West Coast, seismic design makes anchoring part of the rack design itself.
In earthquake zones, racking is designed for seismic loads under ANSI MH16.1 and ASCE 7, and its anchors carry those loads into the slab. Tall or high-piled storage usually needs a permit that shows the anchorage; see our high pile storage permit page.
The steps sound simple: drill to depth, clean the hole, set the anchor, shim the plate, torque to spec. The mistakes are what cause failures: wrong size, shallow holes, dust left in, drilling into rebar or a thin slab, and silica dust OSHA regulates. A trained crew checks the slab, sizes the anchors and does it right the first time. Missing anchors often show up first on a pallet rack inspection.
