Free quotesReply within one business dayServing OR · WA · CA, shipping nationwide
Mon–Fri 8am–5pm PTTalk to our team: 971-337-6608
Lenokers/Products/Warehouse Racks/Rack Components/Pallet Rack Beams
Step beams for teardrop racking and structural beams, new or used, in the length and capacity you need. Matched to the uprights you have, supplied or installed, with a reply within one business day.
years installing racking
racking installations completed
our core service area, with projects beyond it
| Specification | Standard range |
|---|---|
| Types | Step beams for teardrop uprights; box beams; structural channel beams |
| Lengths | 48″ to 144″; 96″, 108″ and 120″ are the most common |
| Face heights | About 3″ to 6″: the taller the face, the more each level carries |
| Connectors | Welded end plates with rivets that seat in the upright slots, plus a safety clip; structural beams bolt on |
| Static capacity | Rated per pair of beams for the length and face height; confirmed in your quote |
| Level spacing | Teardrop beams move in 2″ steps up the upright |
| Finish | Powder-coated, usually orange; other colors on request |
| Condition | New or used |
| Lead time | 1–3 weeks for common sizes; confirmed in your quote |
| Other sizes | On request: tell us what you need |
Capacities are static ratings; every quote confirms the rating for your load.
Two replacement beams or a whole building: every request gets a priced quote.
New steel, used stock, or a mix of both to fit the budget.
Sent from the shipping point nearest your site, supply only or installed.
Layout, permit drawings, anchoring and installation, when you need them.
Beams with their connectors and clips, delivered to your dock.
RecommendedDelivered and built by our own crew.
A phone photo of the upright, the beam end or the deck you have is enough to start. We match it.
Send my details
More photos
Racking installations
1,200+
Years installing racking
20+
First reply
1 business day
“They did a great job, reasonable pricing, and they are very open to jobs with shifting deadlines/priorities.”
Rocky Pope, Google review
Free quote · reply within one business day
Dmytro and Lenokers went above and beyond my expectations. We were looking to liquidate a good amount of pallet racking from our warehouse and between our first contact and our warehouse being cleared of our racking, barely a week had passed! They were kind, courteous, and more than professional for the entire experience. I would not hesitate working with them again!
Lenokers did a great job for us. Professional and timely. I recommend there services.
Dmytro was great to work with
All went smoothly
Will definitely be calling again
Tim
Steel Tek
We had to move some inventory around very quickly to make room for a new customer and we ran out of rack space. I called Lenokers and they had exactly what we needed. Within 3 hours we had our racking and we're back to getting organized!
Thanks guys!
It was a pleasure working with Dmytro and his team to improve our warehouse! Timely communications and service.
How are pallet rack beams priced?
Per pair, by length, face height and connector, new or used, plus freight or installation if you want it. Send a photo of your upright, the length and the load per level, and we price the exact beams.
Will your beams fit my racking?
Most teardrop racking shares the same slot pattern, so teardrop step beams fit most teardrop uprights. Other styles need their own connector. A photo of the upright face is usually enough for us to match it.
How much can a pair of beams hold?
It depends on the length and the face height: shorter, taller beams carry more. Every beam is rated per pair as a static capacity, and the quote states it for your size.
How do I measure beam length?
Beam length is the clear distance between the faces of the two uprights it spans. A 96″ beam fits a bay of about 99″ from upright center to center.
Do you sell used pallet rack beams?
Yes. Used beams are quoted next to new so you can compare, and we tell you which is which in the quote.
Can you add levels to racking I already have?
Yes. Teardrop beams move in 2″ steps, so a new level can usually go into the racking you have, as long as the frames are rated for the added load. See rack inspection.
Part sizes and quantities, or a photo of the racking you have. You get a priced list, new or used.
Any order size
New & used
Supply only or supply & install
Prefer to talk? Call 971-337-6608 · Mon–Fri 8am–5pm
We reply within one business day.
Pallet rack beams are the horizontal members that span between upright frames and carry each level of pallets. Teardrop step beams hook into the slots of teardrop uprights and are locked with a safety clip; structural beams bolt on. Beams are sold in pairs, by length and face height, and each pair carries a static capacity for its size. Lenokers supplies pallet rack beams new and used, shipped from points across the US, matched to the racking you already have, supply only or installed by our own crews.
Each beam end has a welded connector with rivets that seat in the upright’s slots, with a safety clip that stops the beam lifting out. Teardrop connectors move in 2″ steps, so levels can be moved without tools other than a mallet.
A longer beam spans a wider bay; a taller face carries more weight over the same span. Capacity is stated per pair, as a static rating, and the frames must carry the total of all the levels above them.
Used beams come out of warehouses that are re-laid out or closed. They are sorted by length and connector; a bent beam or a cracked weld should never go back into a rack.
Colors and makers differ, but slot patterns are often shared. We match by the upright face and slot pattern from your photo, and say plainly when a different connector or a full bay is the safer choice.
